This is kind of a corner case, but I recall hearing that those with a winch set up have lost some height in the front (I happen to have a winch set up). If this is true, is it possible to compensate with your kit?
It certainly is, but the design on the front of the vehicle means no more than 1.25" of lift is safe, so it will counteract the winch weight if you're not lifted already. If you've already done the full lift, it is what it is at that point.
To level it out and lift it, you could do the full lift in the front and use only one spacer per wheel in the rear. That would give 1.25" in the front and either .4" or .5" in the rear, depending on what size spacer you use/prefer.
Sent from my iPhone using Tapatalk
Anvil | V6 | Leather | Nav | Hood Decal |
RRO Bumper/Skid | LED Lighting | Hazard Sky A-Pillar Mounts | Gobi Ladder | CB/Ham | OEM Hitch Receiver + Wiring | 1.5" Hazard Sky Lift | 265/65 KO2 Tires | Hitchgate Solo | HS 1.25" Wheel Adapters | Rubicon Wheels | Hi-Lift Mount
Overland M101a2 Trailer Build Log